利用GeoServer建立本地二维地图服务器

本来想用ArcGIS Server10.2作为地图服务器，但是ArcGIS Server10.2必须在64位机器上运行，而本机是32位系统，所以不能采用ArcGIS Server，一些文献和教程上都推荐GeoServer作为二维地图服务器。

1、安装配置GeoServer

此爱如少年的博客：https://blog.csdn.net/u012413551/article/details/87925998

tomcat服务器配置，需要安装Java环境

https://blog.csdn.net/xiaoxiaokuer/article/details/105682359

打开tomcat服务器，打开http://localhost:8080/geoserver

用户名：admin
密码：   geoserver

2、发布地图服务

此爱如少年的博客：https://blog.csdn.net/u012413551/article/details/87999686

在tomcat的geoserver目录下data/data添加省界和河流数据

新建工作区：test

命名空间URI：http://localhost:8080/geoserver/test

数据存储，新建矢量数据源，即刚才的test_data目录

图层：新建图层：添加一个新图层：逐一发布图层

发布图层组

3、添加矢量图层

LayerPreview，点击GML

http://localhost:8080/geoserver/test/ows?service=WFS&version=1.0.0&request=GetFeature&typeName=test%3Abou2_4p&maxFeatures=50

{
"pid": 3070,
"type": "wfs",
"name": "省面",
"url": "http://localhost:8080/geoserver/test/ows",
"layer": "test:bou2_4p",
"parameters": { "maxFeatures": 50 },
"minimumLevel": 15,
"symbol": { "styleOptions": { "color": "#00469c", "outline": false, "opacity": 1 } },
"buildings": { "cloumn": "floor" },
"center": { "lat": 31.818396, "lng": 117.229083, "alt": 2554.4, "heading": 359.2, "pitch": -83.1, "roll": 360 },
"popup": "名称：{NAME}<br />层数：{floor}"
},
没有报错，也不显示

百度了一下，发现cesium调用wfs的方式应该不是这种方式，将地址全部拷贝，

https://www.cnblogs.com/arxive/p/8414843.html

用KML

{
"pid": 3050,
"type": "kml",
"name": "bou2_41",
"url": "http://localhost:8080/geoserver/rest/resource/data/test_data/bou2_4l.kml",
"symbol": { "styleOptions": { "color": "#00FF00", "width": 2 } }
},
报错，Access to XMLHttpRequest at 'http://localhost:8080/geoserver/rest/resource/data/test_data/bou2_4l.kml' from origin 'http://127.0.0.1:4545' has been blocked by CORS policy: No 'Access-Control-Allow-Origin' header is present on the requested resource.

是跨域问题，https://blog.csdn.net/u012413551/article/details/83243164

cesium加载资源都不允许跨越，所有需要配置下需要跨越的站点，如geoserver等，
打开geoserver目录下webapps\geoserver\web-inf中的web.xml
添加过滤器代码：
<filter>
<filter-name>CORS</filter-name>
<filter-class>com.thetransactioncompany.cors.CORSFilter</filter-class>
<init-param>
<param-name>cors.allowOrigin</param-name>
<param-value>*</param-value>
</init-param>
<init-param>
<param-name>cors.supportedMethods</param-name>
<param-value>GET, POST, HEAD, PUT, DELETE</param-value>
</init-param>
<init-param>
<param-name>cors.supportedHeaders</param-name>
<param-value>Accept, Origin, X-Requested-With, Content-Type, Last-Modified</param-value>
</init-param>
<init-param>
<param-name>cors.exposedHeaders</param-name>
<param-value>Set-Cookie</param-value>
</init-param>
<init-param>
<param-name>cors.supportsCredentials</param-name>
<param-value>true</param-value>
</init-param>
</filter>
添加过滤器路由代码：
<filter-mapping>
<filter-name>CORS</filter-name>
<url-pattern>/*</url-pattern>
</filter-mapping>
添加完毕后，重启geoserver
如果目录中存在maven，需要在pom.xml中，添加
<dependency>
<groupId>com.thetransactioncompany</groupId>
<artifactId>cors-filter</artifactId>
<version>[ version ]</version>
</dependency>

上面方式尝试了也不行，后来，修改了将2个jar文件放在tomcat自己的lib中，在tomcat的web.xml文件中添加上述内容，就没有报跨域的错

但是报授权错误，关闭geoserver的授权

https://blog.csdn.net/weixin_30634661/article/details/95457016

最后报渲染的错误，可能是数据量太大或者范围较大的缘故

自建测绘线路shp文件，转成kml

{
"pid": 3050,
"type": "kml",
"name": "dyroad",
"url": "http://localhost:8080/geoserver/rest/resource/data/test_data/dyroad.kml",
"symbol": { "styleOptions": { "color": "#00FF00", "width": 2 } }
},
仍然报渲染的错误，mar3d自己的kml文件也是这样。

本地文件，同样是这个问题：

{
"pid": 3050,
"type": "kml",
"name": "dyroad",
"url": "data/dyroad.kml",
"symbol": { "styleOptions": { "color": "#00FF00", "width": 2 } }
},

TypeError: Failed to execute 'shaderSource' on 'WebGLRenderingContext': parameter 1 is not of type 'WebGLShader'.

搜索了一下帮助，发现时GPU占用过高，造成webgl保护机制

关闭chrome的硬件加速，就可以加载kml文件，但是开头动画不能显示

尝试一下WFS，

新建一个shp点图层，通过geoserver发布

在LayerPreview中点击GML，如下地址：

http://localhost:8080/geoserver/test/ows?service=WFS&version=1.0.0&request=GetFeature&typeName=test%3Aplacename&maxFeatures=50

在config.json添加如下图层：

{
"pid": 3070,
"name": "东营点",
"type": "wfs",
"url": "http://localhost:8080/geoserver/test/ows",
"layer": "test:placename",
"parameters": { "maxFeatures": 50 },
"minimumLevel": 13,
"symbol": {
"type": "billboardP",
"styleOptions": {
"image": "img/marker/mark1.png",
"scale": 0.7,
"scaleByDistance": true,
"scaleByDistance_far": 20000,
"scaleByDistance_farValue": 0.5,
"scaleByDistance_near": 1000,
"scaleByDistance_nearValue": 1,
"clampToGround": true,
"label": {
"text": "{项目名称}",
"font_size": 15,
"color": "#ffffff",
"outline": true,
"outlineColor": "#000000",
"pixelOffsetY": -30,
"distanceDisplayCondition": true,
"distanceDisplayCondition_far": 2000,
"distanceDisplayCondition_near": 0
}
}
},
"popup": "all"
},
如果更改shp图层的属性，需要删除数据源，重新添加数据源，然后发布

结果如下：